Capricorn

Project: Capricorn Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.5mm  The Max Depth is 2.3mm and the Actual Depth is 2.3mm Filaments Used: Black Transmission Distance: 0.3 Red Transmission Distance: 7.5 Gold Transmission Distance: 3 White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.74mm) swap to Red At layer #13 (1.06mm) swap to Gold At layer #15 (1.22mm) swap to White At layer #20 (1.62mm) swap to Gold At layer #22 (1.78mm) swap to White for the rest.