Captain Rex Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Captain Rex Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.6mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA PolyLite Azure Blue Transmission Distance: 3.4 PLA Panchroma PLA Translucent Grey Transmission Distance: 6.8 PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 4 unique filaments ***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #28 (1.24mm) swap to Azure Blue At layer #35 (1.52mm) swap to Transluce