Caravelle 3 Air Inter

Project: Caravelle 3 Air InterPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x153.75mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8c9099 PLA PolyLite Gray Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 single filamentsChange instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #15 (1.28mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.---------------------------------------------------Projet : Caravelle 3 Air InterImpression avec un remplissage à 100 %, une épaisseur de couche de 0,08 mm et une couche de base de 0,16 mm.Le modèle mesure 200 x 153,75 mm.Vous pouvez imprimer avec des épaisseurs de couche supérieures, in