Carbon Inspired Strong Wall Mountable Modular Hex Box

Update :
2021.02.19 - Added a V2 cage wall that uses even less material with a honeycomb pattern.
-----

This is a fairly large and strong Modular Storage that can be expanded as much as you wish. It is primarily designed to be mounted onto a wall through screws into wall studs, but it is usable even on a table as a general purpose container.

Every piece in the project is designed with 2 key purposes in mind. (a) Print without support. (b) take advantage of a mirror smooth finish when printing on glass/mirror without any glue to get a --- mirror smooth finish on one side --- this looks awesome btw.

Each module is larger than the size of the largest toilet paper roll you can buy. It is about 120mm deep and 150mm from opposite corners.


Print settings : FWIW, 0.3mm looks ok, but if you really want the posts to look nicer, 0.2mm will make it a lot smoother, however, 0.3mm is reasonable to me.

1. This needs lots of M4 nuts and M4 x 20mm (or 25mm) bolts, as each pos