card10cover
von 9-R
3
Downloads
5
Likes
0
Makes
# Card9 case
# History
* 2019, Sept 21th: updated version with multiple improvements
* 2019, Aug 20th: initial release
# Features
The case provides additional protection to your card10, while still giving you access to most of the sensors, buttons and LEDs.
# Editing
This repo contains an a FreeCAD file of the card10 case. You can modify it to suit your needs.
To export a .stl by selecting the bodies you want to combine and use >File>Export. I.e. to create the supplied card10case.stl you will need to select the following files:
* card10cover group
which contains:
* hull
* button_A
* button_B
* button_C
* button_D
* clip_A
* clip_B
* clip_C
* clip_D
# Printing
When using an FDM printer, printing the model up side down should work best. Support needs to be activated for the large gap in the lower right corner. Some slicers may try to add support to the buttons on the left and right side. This is
# History
* 2019, Sept 21th: updated version with multiple improvements
* 2019, Aug 20th: initial release
# Features
The case provides additional protection to your card10, while still giving you access to most of the sensors, buttons and LEDs.
# Editing
This repo contains an a FreeCAD file of the card10 case. You can modify it to suit your needs.
To export a .stl by selecting the bodies you want to combine and use >File>Export. I.e. to create the supplied card10case.stl you will need to select the following files:
* card10cover group
which contains:
* hull
* button_A
* button_B
* button_C
* button_D
* clip_A
* clip_B
* clip_C
* clip_D
# Printing
When using an FDM printer, printing the model up side down should work best. Support needs to be activated for the large gap in the lower right corner. Some slicers may try to add support to the buttons on the left and right side. This is
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
