Cardinal and Cross Hueforge

I printed it at the 150mmx150mm size. I originally did the picture in Hueforge at 200mmx200mm but wanted it a little bit smaller. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6.1 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Coffee Transmission Distance: 3 PLA+ Sunlu White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #15 (1.28mm) swap to Coffee At layer #17 (1.44mm) swap to White for the rest.