Case feeder Mount plate redux

This is a ground up redesign for the pole mount for the Case Feeder by GolluB to fit my Dillon xl750 with the stock straight case drop tube on the stock pole and have adjustable height. I just had to ream the case feeder drop tube a little so the tube would fit in. Uses the same mounting screws for the feeder but I also incorporated a 5mm bolt and nut to pinch the tube and make sure it stays in position and to put more weight on the mounting tube. The part is just small enough to fit on my Ender 3 V2 so shouldn't have a problem on most midsize machines. I also added some cable tabs to the side for those that hate hanging wires like myself. I have literally loaded the hopper all the way to the brim just to double check strength and beat on it with no cracks or breaks so as long as your machine is well tuned you should have no problems! Just comment if you have issues and I will see about fixing it but so far it works great for me. I may update later with slots to adjust the feeder forwa