Case for China Component Tester

3D design files have been updated. Minor changes. Battery compartment, better space. Screw mounts and holes fixed. Predrill screwholes in bottom with 3mm drill. Predril screwmount holes with bottom on using a 2mm drill. Do not drill through. Use 3mm plastic screws.

This design is a case for my China/EBay component tester. Its much the same as the other models, often called T3 or T4, but the cases i downloaded from the other projects in here, does not fit my PCB. I did try, but there was ever so slight differences, and I had to start from scratch.

First difference was that my component tester PCB came with a square pushbotton top. All other designs I have seen in here, has a round pushbutton top,

The next difference is that my PCB has a different PCB layout. The distance between the component socket and the display is somewhat smaller causing the other cases not to fit correctly. The difference is not clearly visible, but enough to make the PCB not fit the other cases.

My gu