Case for Gameboy Link Cable Adapter

This is a encasing for the link cable adapter by Agtbaskara. The adapter can be found at https://github.com/agtbaskara/game-boy-pico-link-board.

It is based on the following assembly:
1) Pico H (e.g. https://www.pi-shop.ch/raspberry-pi-pico-h)
2) Mini-Switch (e.g. https://www.pololu.com/product/1408)
3) PCB thickness of 1.2mm

For other assemblies it is not guaranteed to fit. If you use a standard pico and solder it directly onto the PCB it will not fit. You will have to use pin headers.

Update 9.11.2023: Shortened the back clip so it is easier to pull apart and does not break the clip all the time. The renders and the live image still have the long clip.
Update 15.11.2023: Slightly broader back clip, so it holds better. Slightly slimmer button to fit better. Slightly smaller button that it not sticks out that much. Slightly less tall hole to hold the button in top case so it is a little further from the button on the pico board. The renders and the live image still are the