Case for Lubancat 4

在使用此模型前，你必须拥有官方外壳套件！YOU MUST HAVE THE ORIGINAL LUBANCAT4 CASE KIT BEFORE USING THIS MODEL!!物料清单 BOMM3x6 自攻螺丝 6个M3x6 Self Tapping Screws 6 pcs3x10xM2.5 塞打螺丝 4个，光杆直径3mm长10mm，螺纹M2.5长5mm，如图所示，我买的就是这个3x10xM2.5 Shoulder Machine Screws 4 pcs，i.e., shoulder diameter is 3mm, and length is 10mm; bolt size is M2.5, and length is 5mm.You can refer to this graph:如果你找不到这样的螺丝，请使用M2.5x14螺丝作为替代。If you cannot find such screws, please use M2.5x14 screws instead.安装步骤 Installation Steps拆卸官方外壳的四颗螺丝Remove 4 screws in the original case.将整个套件置入下壳，注意使散热鳍片后部接触到外壳的开口部分。此时，你的USB-C接口和HDMI接口应该已经嵌入了壳体。Push the whole kit into the bottom part of the case. Make sure the heat sink fins have touched the end of the case. Now, the USB-C ports and HDMI port should be inserted into the holes.拧上底部的四颗塞打螺丝Tighten 4 shoulder screws at the bottom.装上上盖Attach the lid.拧上六颗自攻螺丝.Tighten 6 self tapping screws.Enjoy