Case For RaspberryPi RetroPie

Case for RaspberryPi with 10.1" Display

I designed this Case while i build my RetroStation.

Print the two big halfs of the case vertically!

Assembly Instructions:

Insert Ribboncable in Port on Driverboard of the Display, slide RetroPie-Case_Left and RetroPie-Case_Right on the Display (watch out so you dont rip the ribboncable).
Place the driverboard plate around the ribboncable and screw it down with M2.5 Screws.
Plug HDMI cable in to the driverboard and screw it to driverboard plate.
Plug HDMI cable in to RaspberryPi and also screw it down (i had to put nuts on the screws first so they are not too long).
Plug in Micro-USB cable to RaspberryPi and 12v Poweradapter to the driverboard.
Screw the Fan on to the right backplate and connect it with the du pont cables to pin 2 (5v) and pin 6 (ground) to the RaspberryPi.
Screw the Backplates on and you are done.

Parts you need:

10.1" Display:
https://www.ebay.de/itm/10-1-inch-LCD-Screen-Display-Monitor-Driver-Board-HDM