Castle on the Cliff Bookmark

Hello, here's my new model, Castle on a Cliff Bookmark.Model comes with holes in the angles and an hole strap in the top part, (picture does not have them) feel free to remove adjust as you like. Boost MeBoost me if you like ancient Castles! You can resize the model on the X&Y, but not on the Z to not mess up layers and color swaps.Remember to deselect unform scale in the slicer before you resize! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 40.08x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Fossil Grey Transmission Distance: 1.6 PLA JAYO White Transmission Distance: 7.2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Fossil Grey At layer #16 (1.36mm) swap to White for the rest.