Cat on the bed - HueForge

Cat on the bed - HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Beige Transmission Distance: 10 PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #15 (1.28mm) swap to Beige At layer #22 (1.84mm) swap to White for the rest.Thank you!!