Cat playing with a pumpkin (Hueforge)

Caution: this is my very first Hueforge print. Currently the print is very thin. Please make sure that the print is cooled down properly prior to removal from the bed. Otherwise the print could break very easily! Please consider this before printing. This is a Hueforge image of a cat playing with a Halloween pumpkin. The image contains four colors, so the usage of an AMS is highly recommended:Layer 1 to 6 are blackLayer 7 is brownLayer 8 to 12 are orangeLayer 13 to 20 are white For the print in the image I have used Bambu PLA matte charcoal (11101), Bambu PLA matte latte brown (11800), Bambu PLA matte mandarin orange (11300) and Bambu PLA matte ivory white (11000). Print time takes about 1 hour and 41 minutes at 0.08mm Extra Fine print quality on a Bambu Lab P1S printer with 0.4mm nozzle. Initial layer height is set to 0.16mm. The printed model has a size of roughly 16 by 8 cm (6,3 by 3,2 inches). Again: please be warned that the print is very thin and may get damaged when pulling it f