Thingiverse
Cat toy fish tail prothesis
door lesf0
1
Downloads
1
Likes
0
Makes
Replacement tail for a popular cat toy fish.
Original tail is made of weak plastic and starts to swing around the spindle after a while, this model loosely recreates it.
May require some adjustments depending on the actual spindle you have and printer type you'd use. My fish had 25mm long 2x2mm square spindle, so I made a square hole 2.2x2.2mm to adjust for possible resin drips during the printing. If you're working with plastic, you should probably shrink that hole. May also require some sandpaper finetunement.
I used autogenerated supports from photon workshop.
UPD: better version there: https://www.thingiverse.com/thing:5640640
Original tail is made of weak plastic and starts to swing around the spindle after a while, this model loosely recreates it.
May require some adjustments depending on the actual spindle you have and printer type you'd use. My fish had 25mm long 2x2mm square spindle, so I made a square hole 2.2x2.2mm to adjust for possible resin drips during the printing. If you're working with plastic, you should probably shrink that hole. May also require some sandpaper finetunement.
I used autogenerated supports from photon workshop.
UPD: better version there: https://www.thingiverse.com/thing:5640640
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!