Thingiverse
Catan Piece Holder
di EnderDave
46
Download
39
Likes
0
Makes
Remix from https://www.thingiverse.com/thing:3418593
This is a very slight edit of mAZZING1's excellent Catan piece holder. The game pieces may have changed slightly since their design as the settlement pieces do not fit. This edit changes the depth of the settlement rectangles so the pieces will fit.
UPDATE - 3/5/2021
- Resized the holes in the piece holder so that every piece would fit (tested with all pieces from base and extended sets).
- Added a cover for the pieces that snaps on to the holder. *Most* pieces should stay put with the cover on but some of the settlements may turn in their rectangular holes as they are not all a consistent size. There are two covers - a "tight fit" and a "good fit". There is a .1mm difference on all faces/side between the two files. You can also use your slicer size settings if the fit is too tight or too loose on the base/piece-holder. A very tiny adjustment, if required, should do the trick and not cause the "bumpers" or extens
This is a very slight edit of mAZZING1's excellent Catan piece holder. The game pieces may have changed slightly since their design as the settlement pieces do not fit. This edit changes the depth of the settlement rectangles so the pieces will fit.
UPDATE - 3/5/2021
- Resized the holes in the piece holder so that every piece would fit (tested with all pieces from base and extended sets).
- Added a cover for the pieces that snaps on to the holder. *Most* pieces should stay put with the cover on but some of the settlements may turn in their rectangular holes as they are not all a consistent size. There are two covers - a "tight fit" and a "good fit". There is a .1mm difference on all faces/side between the two files. You can also use your slicer size settings if the fit is too tight or too loose on the base/piece-holder. A very tiny adjustment, if required, should do the trick and not cause the "bumpers" or extens
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
