CATAVENTO - Wind Vane! 1 hour project!

by UniDuni3d · Gadgets

75 Downloads

47 Likes

1 Makes

*What about a 1 hour project?*Print the wind vane!!!Watch build video (*and subscribe to support me*):https://youtu.be/wLRc11sCMeEMaterials needed: 1 cutter plier (for 45 degree cut)3,5-5cm of filament (for the axle)lighter (just a little touch of the filament to soften)1 4mm skewer OBS:CATAVENTO COMPLETO is the best to print, make sure the Wind vane is only 1 layer, or it can get too stiff!

fidget flexi project fast flat pack

UniDuni3d also publishes on

12 additional models across 1 more platforms

Printables

12 models

♥ 586 ↓ 3,384 ⚒ 70

Frequently Asked Questions

Does CATAVENTO - Wind Vane! 1 hour project! need supports when printing?

Nope — CATAVENTO - Wind Vane! 1 hour project! is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print CATAVENTO - Wind Vane! 1 hour project!?

According to the design notes, CATAVENTO - Wind Vane! 1 hour project! takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is CATAVENTO - Wind Vane! 1 hour project! available in?

CATAVENTO - Wind Vane! 1 hour project! is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is CATAVENTO - Wind Vane! 1 hour project! free to download?

Yes, CATAVENTO - Wind Vane! 1 hour project! is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

CATAVENTO - Wind Vane! 1 hour project!

Similar Models

Add to Collection