Thingiverse
CATBOX ITX PC Case (free version)
von munsplit
231
Downloads
626
Likes
4
Makes
Free version of Catbox ITX pc case design.
11.2L, 356mm 3.9 slot GPU, ATX PSU, 366x169x180mm (excluding protruding parts)
Fully 3d printed; Easily editable to suit your size needs; Very rigid; Perfect for travelling in a backpack; Fully protected with dust filters; Easy cable management; Great temperatures; All components are securely mounted; .STEP and .STL files with .Plasticity file attached; Full assembly manual.
printed with NO supports and post processing needed; All parts are in print ready position; Less than 1kg of filament; Longest part is 191mm so it will fit any 200x200 or larger print beds; Can be assembled with only m3x10 socket head screws with inserted nuts (side panels 8 or 10mm, everything else 10 or 12mm).
Nothing screws in directly into the plastic, meaning it can be reassembled however many times you want without loosing any strength; Best with 20cm reversed GPU riser; A mouse micro switch as a power button; Almost any USB variant can be used for th
11.2L, 356mm 3.9 slot GPU, ATX PSU, 366x169x180mm (excluding protruding parts)
Fully 3d printed; Easily editable to suit your size needs; Very rigid; Perfect for travelling in a backpack; Fully protected with dust filters; Easy cable management; Great temperatures; All components are securely mounted; .STEP and .STL files with .Plasticity file attached; Full assembly manual.
printed with NO supports and post processing needed; All parts are in print ready position; Less than 1kg of filament; Longest part is 191mm so it will fit any 200x200 or larger print beds; Can be assembled with only m3x10 socket head screws with inserted nuts (side panels 8 or 10mm, everything else 10 or 12mm).
Nothing screws in directly into the plastic, meaning it can be reassembled however many times you want without loosing any strength; Best with 20cm reversed GPU riser; A mouse micro switch as a power button; Almost any USB variant can be used for th
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
