Catch Can cap

I bought a Catch Can from Ebay for my Diesel car, works great but over time the soft plastic has worn and fatigued so that no longer screws on tight and the pressure relief valve isn't held in the cap.
The inside diameter is 105 mm if that helps decide if it's useful.
I've given you 2 options here;
1) print as 1 piece.
2) print in 2 parts one that clips onto the pressure relief valve which you can then glue/stick to the cap.

I found that printing a one piece the clips were not very robust and a couple broke when attaching the pressure relief valve.

I printed in ABS as its more temperature resistant than PLA, use what suites.

Happy printing