CatDog Logo

CatDog logoThis model is free - Alone in the world was a little CatDog! Prints in parts on 4 plates. One for the base, one for the “CAT” words, one for the “DOG” words, and another for the outline. This separates the colours for those without an AMS. You will need to add in a pause to manually need to swap filaments over if you don't have an AMS for the base plate model. If you do have an AMS, just press print.Tight tolerances which allows the pieces to click in and hold for a semi-permanent option. This is very satisfying when assembling. Use glue to hold the pieces together for a permanent solution. If the black outline model stands off the yellow base model a little when assembling, use a little glue here to hold them together. Modelled from scratch to allow the pieces to overlap by a minimum 3mm.There are 3 different design profiles available:The standard - which is the same scale and thickness as all my other designs. Roughly 30mm font height and specifically modelled to be un