MakerWorld
2D Art
Go to Model
Catpool - Hueforge - 4 colours!
7
Downloads
12
Likes
3
Makes
Combining cats and marvel to give us catpool! 4 colour hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 1.12mm The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.64mm Filaments Used: #000000 PLA Sunlu Matte Black Transmission Distance: 0.1 #ffffff PLA sunlu white Transmission Distance: 6.8 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8 #f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 5.3 This print uses 4 unique filaments Swap Instructions: Start with Matte Black At layer #14 (1.2mm) swap to white At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #25 (2.08mm) swap to white for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
