Thingiverse
CCI Phantom Feed Options
por Rklenke
4
Descargas
8
Likes
1
Makes
*UPDATE* I added a new feedneck that is cleaner and shorter. It also uses the same M4 hardware, but now uses a regular 8-32 x 5/16 screw to mount. This is easier to find than the longer ones that work on the metal phantom mount.
Dual Breach - Print as is with 4 walls and a decent amount of infil. Use tree supports, but check to see if the slicer puts supports in the threads. Threads don't need supports, but the rest of the print does. If it does print supports in the threads, they come out, but it takes some time.
Feed tube - print on a raft, no supports. I've done anywhere from 2 walls to 4 walls and from .2 to .3 quality.
Load cap - This only works if you print with a filament change and go from TPU to PETG. Choose the last layer after the fingers and input the filament change. You could possibly remix and make a 100% TPU slip over (CCI) style feed gate.
*EDIT* I made the slip over style and called it TPU feed gate. Print the whole thing in TPU and slip it over the end o
Dual Breach - Print as is with 4 walls and a decent amount of infil. Use tree supports, but check to see if the slicer puts supports in the threads. Threads don't need supports, but the rest of the print does. If it does print supports in the threads, they come out, but it takes some time.
Feed tube - print on a raft, no supports. I've done anywhere from 2 walls to 4 walls and from .2 to .3 quality.
Load cap - This only works if you print with a filament change and go from TPU to PETG. Choose the last layer after the fingers and input the filament change. You could possibly remix and make a 100% TPU slip over (CCI) style feed gate.
*EDIT* I made the slip over style and called it TPU feed gate. Print the whole thing in TPU and slip it over the end o
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
