Thingiverse
Cell Lampshade (B22 Fitting)
di SwichMad
4
Download
4
Likes
0
Makes
Liked the original version but it took ages to print the first layers, so I`ve changed the design slightly to be more printer friendly.
Printed in glow in the dark filament but you can use any PLA, PETG or ABS.
PLA prints fine at 0.2 with 100% cooling and 80mm/s speed. PETG needs half the speed for the same layer height and 100% cooling.
4 bottom layers in vase mode for LED or fluorescent lamps PLA or PETG.
Increase bottom layer count for higher wattage lamps.
For incandescent lamps, use PETG or other heat resistant material with at least 3mm thickness for the bottom layers.
Printed in glow in the dark filament but you can use any PLA, PETG or ABS.
PLA prints fine at 0.2 with 100% cooling and 80mm/s speed. PETG needs half the speed for the same layer height and 100% cooling.
4 bottom layers in vase mode for LED or fluorescent lamps PLA or PETG.
Increase bottom layer count for higher wattage lamps.
For incandescent lamps, use PETG or other heat resistant material with at least 3mm thickness for the bottom layers.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
