Cement Candle using 3D Printed Mold

## **Preface**
This candle is part of a [video](https://youtu.be/muWc_HYNCkE) which I've published on my YouTube channel. I recommend watching the video to understand how these parts are meant to be used, although I'll do my best to explain it here as well.

---

## **Specifications**
The dimensions are specified by the size of the inner cavity, as that's the size that determines what kind of wick you'll want to use. But don't get too hung up on wick sizes. I found out that there's an entire community around candles where they take wick sizes very serious, but for most of us, we won't even be able to tell the difference. For reference, I used a wick with a diameter of 3mm.

There are three candle sizes to choose from: 50x50x50mm, 75x75x75mm, 100x100x100mm. With outer dimensions of 60x60x60mm, 85x85x85mm & 110x110x110mm.

---

## **What to print?**
One mold consists of 3 parts: Two of which are sides and one for the bottom. I put my logo on the wall of one of the sides. If