Thingiverse
Cemetery Vase 2
von Hadgee
6
Downloads
13
Likes
0
Makes
Hi, not a direct RE-MIX but certainly inspired by SLWise to make my own variation on the idea.
I wanted to be able to screw the vase together and managed that using OnShape Cad Design.
You can setup a 'OnShape' free account and work with my file to add your own text to the plaque.
https://cad.onshape.com/documents/1a24c372dd00fd9551c4b80c/w/197f184ecabe5902f3d3a280/e/82761632ce81845a87c81b78?renderMode=0&uiState=66625b2d6259df03ebc47e56
You will make a copy and can change whatever you like.
As you can see it printed perfectly except the 'Z' print line which I will address when I print again.
I printed at 10% infill at .2 layer with supports. This turned into a nice substantial Vase that should last. I printed in PLA but for longevity outside I would recommend PETG.
Very little cleaning of the threads required.
I wanted to be able to screw the vase together and managed that using OnShape Cad Design.
You can setup a 'OnShape' free account and work with my file to add your own text to the plaque.
https://cad.onshape.com/documents/1a24c372dd00fd9551c4b80c/w/197f184ecabe5902f3d3a280/e/82761632ce81845a87c81b78?renderMode=0&uiState=66625b2d6259df03ebc47e56
You will make a copy and can change whatever you like.
As you can see it printed perfectly except the 'Z' print line which I will address when I print again.
I printed at 10% infill at .2 layer with supports. This turned into a nice substantial Vase that should last. I printed in PLA but for longevity outside I would recommend PETG.
Very little cleaning of the threads required.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
