Thingiverse
CGX Mount Plate
door rlbeers21
3
Downloads
1
Likes
0
Makes
60% infill
PETG
I bolted this to a 3/4" piece of plywood using 6 10mm x 40mm bolts and 10mm nuts and washers. Also need 3 10 mm nuts for the mount bolts. I then bolted the plywood to the deck. Worked great now I don't have to polar align every time I use the mount.
I'm not sure how much weight this can take. Use at your own risk. I just using a small 51mm lens and dslr camera right now. Seems very strong.
PETG
I bolted this to a 3/4" piece of plywood using 6 10mm x 40mm bolts and 10mm nuts and washers. Also need 3 10 mm nuts for the mount bolts. I then bolted the plywood to the deck. Worked great now I don't have to polar align every time I use the mount.
I'm not sure how much weight this can take. Use at your own risk. I just using a small 51mm lens and dslr camera right now. Seems very strong.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
