Slicer Discord
CH1P-E 2.0 Claptrap Walking Robot – 3D-Druckmodell von Thingiverse Thingiverse
CH1P-E 2.0 Claptrap Walking Robot – Bild 1 CH1P-E 2.0 Claptrap Walking Robot – Bild 2 CH1P-E 2.0 Claptrap Walking Robot – Bild 3 CH1P-E 2.0 Claptrap Walking Robot – Bild 4 CH1P-E 2.0 Claptrap Walking Robot – Bild 5 CH1P-E 2.0 Claptrap Walking Robot – Bild 6
Robotics

CH1P-E 2.0 Claptrap Walking Robot

53 Downloads
63 Likes
0 Makes
Zum Modell
This Chip-E is remixed with CL4P-TP aka Claptrap from the video game Borderlands. This gives Chip-E an even more robotic look. Besides that we have added arms to enable better dancing abilities. With his new eye (Pi-Cam) he can see and snap pictures. Speaking of it we have added a Raspberry Pi Zero, with this major hardware upgrade the possibilities are almost endless. So e.g. we changed the little piezo speaker to a real speaker, which we connected over a lowpass filter to the GPIO Pin 18 of the Pi according to adafruits instructions: “https://learn.adafruit.com/adding-basic-audio-ouput-to-raspberry-pi-zero”. So now the ChipE is capable to talk in a real Language or to play songs.
The big problem we ran into with the Raspberry is, that there aren’t enough PWM pins, which are essential for the servos. We thought about using the adafruit servo driver, but we didn't want to wait until it arrives, so we added an Arduino UNO, which communicates over I2C with the Pi and just does the PWM-
Kategorie
Robotics
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen