Cha Hae-in

Project: cha hae in 4.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x286.88mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Chrominal Penumbra Gray Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Penumbra Gray At layer #10 (0.88mm) swap to Orange At layer #13 (1.12mm) swap to Yellow At layer #14 (1.2mm) swap to White for the rest.Boost Meboost for more also message me for any request =)