Thingiverse
Chalk Line
4
Downloads
2
Likes
0
Makes
Chalk line.
Install some natural fiber twine or heavy gauge string. Fill with chalk or some pulverized pigment. I used some roman black earth pigment I had.
Have a look at the openSCAD file if you want to customize it.
I printed with PETG but anything will work.
A bit of super glue is required to secure the two halves of the case after its all said and done.
The pulley was a bit tricky to print the upper half, could adjust the slope of the cylinders to make this easier if you are having issue.
I glued the handle on the top and screwed it as well.
Install some natural fiber twine or heavy gauge string. Fill with chalk or some pulverized pigment. I used some roman black earth pigment I had.
Have a look at the openSCAD file if you want to customize it.
I printed with PETG but anything will work.
A bit of super glue is required to secure the two halves of the case after its all said and done.
The pulley was a bit tricky to print the upper half, could adjust the slope of the cylinders to make this easier if you are having issue.
I glued the handle on the top and screwed it as well.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
