Challenge Coin

OverviewThis is a simple challenge coin template you can use to make your own customized challenged coins using your favorite 3D modeling software. Simply import SVGs onto the Inner Plates, print, snap fit into the perimeter (add glue if desired for stability) and you're good to go.This has been designed for PLA and tested with a 0.4mm nozzle at 0.10mm layer height but should work fine with a variety of other configurations. The original intent was to provide a scannable QR code on the back plate of the coin which you can easily generate at sites such as https://forqrcode.com/. There is also enough space in the middle of the coin that you can place an NFC tag though it is a very tight fit and not all devices can scan NFC very well. Directory LayoutTemplatesThis directory contains the core model files you can use to create your own coins. Simply import the files into your 3D modeling software, create a top and bottom plate from the Inner Plate template, adjust text on the outer ring