CHAMBER LED 24cm

I design this chamber LED bar, it reflects the original design , but it's longer 6cm than the original and it, so you will have more lights inside the chamber without needing to print a riser.To light up the LED bar you can user jumpers to connect it to the original 2 pins connector OR buy the same 2 pins connector than connect it to the board (I RECOMMEND THIS CHOICE) OR solder the cables of the new LED bar to a USB port and connect to a power bank , as example. There are 6 different lenses: P1P , P1S , X1 , X1C , 1 BLANK and 1 with the Bambu Lab logo.When you open the .3MF file of the lenses , you see 6 beds and 6 lenses, you must choose the one you want to print for your printer. You can't never go wrong , it's simple.The total length is 240mm, it cannot be longer otherwise it would touch the STEPPER MOTOR and could melt!I recommend PETG white for the LENS for its properties or white ASA , white ABS , white PC IF YOU FEEL “”""safer""""" , if y