Chameleon - HueForge Print

This chameleon looks like it's popping out of the wall tiles - however, this print is only 2mm thick, and the illusion is the result of the amazing colour blending from the different filament colours! The 3MF will have all necessary filament swaps already coded in if you're using Bambu studio. If you're not, you can download the STL in the attachments, and follow the following instructions: Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Siddament Purple Sparkle Transmission Distance: 5PLA Sunlu Lilac Transmission Distance: 6.6PLA Kingroon White Transmission Distance: 8Swap Instructions:Start with BlackAt layer #11 (1mm) swap to PurpleAt layer #13 (1.16mm) swap to LilacAt layer #19 (1.64mm) swap to White for the rest._______________________________________If you'd like to support me, I now have a Patreon! Joining will give you behind the scenes information on WIPs, access to