Chaos King

This is the chaos king (Amatsu-Mikaboshi) from marvel. this is based off a page from the comic book. the artists are Khoi Pham, Tom Palmer, and Sunny Gho. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 157x220mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #14 (1.2mm) swap to Grey At layer #18 (1.52mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want.To scale it, change the x and y dimensions, do not change the z dimension.Boost Meboost me if you like