Charging Socket Cap for Evolve GTR Carbon Bamboo ( temporary solution)

This is a temporary solution to get a better grip for the original charging socket plug, until an official replacement is available.

Assembly:
1.) Remove the rubber plug carfully from the GTR
2.) Pull the rubber ring e.g. with a straightened paper clip through the larger the two openings of the cap.
3.) Then press the rubber plug with a suitable tool on the bottom of the cap (the cap has a slight recess in the bottom side, so that the rubber plug "snaps" into place). The other (smaller) opening of the cap takes up the original "opening nipple".
4.) Now pull the rubber ring back onto the charging socket. The best way to start at the side recess for the anti-rotation. Then use a thin screwdriver to pull the edge of the bush all the way forward, so that the rubber ring can slide better behind the edge of the bushing. A few crease can ease the assembly - Finished!