Charizard & Ash Hueforge 10x8 Large

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 249x199.2mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 PLA BambuLab Basic Jade White Transmission Distance: 3.5 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Brown At layer #16 (1.36mm) swap to Pumpkin Orange At layer #19 (1.6mm) swap to Sunflower Yellow At layer #22 (1.84mm) swap to White for the rest.