Charizard & Ash Hueforge 7x5

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x124.92mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mmPLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4PLA BambuLab Matte Ivory White Transmission Distance: 3.5Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Blue GrayAt layer #12 (1.04mm) swap to BrownAt layer #16 (1.36mm) swap to Pumpkin OrangeAt layer #19 (1.6mm) swap to Sunflower YellowAt layer #22 (1.84mm) swap to Ivory White for the rest. You may scale the width and length but do not change the height, the print will fail.