Charizard - Bookmark / Portrait

CharizardPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.The Bookmark is 47x150mm.The Portrait is 200x200mm. Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At height depth (0.88mm) swap to Cyan At height depth (1.