Charizard Hueforge Bookmark

Charizard Hueforge Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 65.03x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 3.1mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA PolyLite Wine Red Transmission Distance: 1.7PLA BambuLab Basic Orange Transmission Distance: 5.2PLA BambuLab Basic Yellow Transmission Distance: 5.2PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 5 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to Wine RedAt layer #16 (1.36mm) swap to OrangeAt layer #26 (2.16mm) swap to YellowAt layer #33 (2.72mm) swap to Jade White for the rest. More Bookmarks can be found here Hueforge Bookmar