Charizard Pokemon Hueforge

Continue with the Pokemon series. Project: Charizard_01.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 154.6x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.16mm Filaments Used: #000000 PLA Basic Black Transmission Distance: 0.1 #00358e PLA Basic Blue Transmission Distance: 4 #c00d1e PLA Basic Red Transmission Distance: 3.7 #fce300 PLA Basic Yellow Transmission Distance: 5.2 #ffffff PLA Basic Jade White Transmission Distance: 5.8This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Black At layer #11 (0.96mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White for the rest. For only one AMS, start with 4 colors as follows:Slot1: BlackSlot2: BlueSlot3: RedSlot4: YellowPause was set at Layer 12 to allow color swaps:Slot2: Blu