Charmander - Hueforge

Project: Charmander.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 159.71x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.5mmFilaments Used: PLA BambuLab Basic Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #10 (0.88mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #25 (2.08mm) swap to White for the rest.