Charmander - Pokemon - HueForge

Happy Pokemon Day 2026! I got inspired with the rerelease of Fire Red.For this print, I did use a 0.2mm Stainless Steel nozzle. The model is 68.42mm by 100mm in size or slightly bigger then a trading card. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThis print uses 6 unique filamentsSwap Instructions: Start with Charcoal Black - PLA PolyTerra Charcoal Black Transmission Distance: 0.3 (Any black will probably be fine.)At layer #11 (0.56mm) swap to Silver - PLA BambuLab Basic Silver Transmission Distance: 1.2At layer #18 (0.84mm) swap to Scarlet Red - PLA BambuLab Matte Scarlet Red Transmission Distance: 2At layer #25 (1.12mm) swap to Lemon Yellow - PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.5At layer #39 (1.68mm) swap to Cold White - PLA Polylite Pro Cold White Transmission Distance: 0.4At layer #42 (1.8mm) swap to Arctic Teal for the rest - PLA PolyTerra Arctic Teal Transmission Distance: 0.1When loading more than 4 filaments I would load