Chasecam

Chasecam for paragliding or paramotoring

8 fins needed, attached to the front.
Fins secured with tiewraps to each other and to the the front.
Gopro attachment sticked to the front and secured with a 4mm screew.

Hangingline attached in the balance point on the sides,not on the top.
I filed a small notch on the fins where the lines comes so the lines wont move.

Printed with ABS, if it breaks some cold winterday, I will print it with flexible filament.

Settings:
Layer height 0,2mm
sides, top and bottom thickness 1.2mm
no supports needed
Infill 50%
Printspeed 60mm/s
no cooling