Chassis for CFX adapted for Lost Gray

I modified this heavily from somewhere but I can't seem to find my original download. I think it is this filename ASP_CF-PC+CEX_28mm.

This is made in two pieces to fit inside ultrasaber lost gray. I am using a 28mm speaker, crystal focus X V 10.2, a 16mm antivandal with ring led, a luxeon single LED (hot-glued to the small er piece (held in place in the saber by friction) and the 7.4V battery from TCSS. If you want to be able to easily take apart, you will need to use jst connectors for the switch - otherwise it you will not be able to remove the blade LED without desoldering the LED switch. The CFX slides in and holds perfectly by friction on the longer piece (with the speaker) and the 7.4 volt battery fits up against the recharge port. You can probably use very thin velcro strip, or maybe a zip tie to hold the battery, but I just used some hot glue. It is is a very snug fit, so there isn't a lot of room for things to move around anyways.

I used a larger 5W resistor for the