Chauvet Manifold

I have a Chauvet 1200 Hurricane fog machine. A lot of mods for it involve ducting into boxes for cooling or redirecting the fog. Most of these are basically taping a duct to a brick. Since I'm not willing to leave well enough alone I have designed a replacement for the common brick. No longer will you need to use a rock like a common cave-man. This is 2 parts to allow you to move the duct closer or farther away. It's offset a little to put the nozzle closer to the center of the duct. There is lip to allow you to clamp the duct. I printed in ABS so it doesn't have any trouble with heat near the nozzle. The default settings are 50% gyroid infill with 4 walls. If you don't need it as burly just back those off. I didn't want the clamp pressure to be an issue. You can use PLA if you want, I'm not your mom. Assemble with 6Mx10mm bolts. You have enough clearance to put knurled knobs on them. You have two options for mounting. Unscrew the two screws on the front side, e