Cheetah - HueForge

Cheetah - HueForge Can be rescaled just remember not to change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 3.3mm and the Actual Depth is 2.4mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.Thanks!