Cheetara Thundercats

Cheetara From The Thundercats.Fram used in picture is from canadian gamer slim and square. If you like this print or any others please give me a like and a follow and as always boosts are always much appreciated. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #10 (0.88mm) swap to Ice Blue At laye