Chess Set Medieval Stylized

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.  This time, I present a chess set inspired by Medieval aesthetics. If possible, print them in resin! The pieces have a lot of fine details. Although even an FDM print with a 0.4mm nozzle and 0.08–0.1mm layer height came out very nicely. If you can, also use a high infill to give the pieces a desirable feeling of weight. Print Difficulty level: [4/10] [ Suggested Print Setup for 6-10cm figurines ] Nozzle: 0.4mm Layer Height: 0.1mm Infill: 50% or more - for nice feeling of weight Wall loops: 2 Supports: Tree (auto) Threshold Angle: 30 Printed with:  - PLA Matte Charcoal + Metallic Paint (or not) These photos are real and show an actual 3D-printed figure photographed by me. As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.