CHIBI GEISHA

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA smartfil pink Transmission Distance: 7.4 PLA smatfil White Transmission Distance: 6 PLA Kexcelled Orange Transmission Distance: 8This print uses 5 unique filamentsSwap Instructions: Start with negro At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to pink At layer #13 (1.12mm) swap to White At layer #17 (1.44mm) swap to Orange for the rest.