Chibi Monster Hamster Halloween

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.   You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.   This adorable yet spooky Chibi Hamster Monster is the perfect blend of cute and creepy for Halloween! With stitched scars across its head and body, tiny fangs peeking out, and big round eyes, it looks like a mischievous little creature straight out of a haunted laboratory. Whether you imagine it as a stitched-up experiment gone wrong or a cursed familiar that follows you through the shadows, this tiny terror will charm fans of Halloween, horror, and all things chibi. A must-have for anyone who loves mixing sweetness with a touch of fright!    Guide   Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:       1. DRY THE FILAMENT 2. CHANGE THE NOZZLE TO A NEW ONE.       Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.     Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.     Recommendations:   0.08-0.2. In the event of changing the original height, the height of the supports should be changed.   PLA+HS, PLA+, PLA, PLA silk Recommend