Christmas Astronaut

If you have AMS with the filament color you can just start printing. Without AMS follow instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.45x150.45mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to BambuLab Green At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to White for the rest.